BCM8124 ? low-jitter 10-gbps 16:1 mux with clock generation and msa features BCM8124 application diagram ? supports 10-gigabit msa (multi-source agreement) features enhanced 10-gbps serial output data: minimum 500 mv, single-ended output voltage swing fully integrated clock multiplication unit (cmu) and multiplexer support for multiple rates?oc-192: 9.953 gbps, oc-192 fec: 10.664 and 10.709 gbps, 10g ethernet: 10.3125 gbps 16:1 multiplexer with lvds data inputs configurable bus clock for divide either by 32 or 16 of the selected high-speed output rate configurable lvds input clock to data bus timing skew control for 311.04-mhz clock mode on-chip 16 x 10 fifo to eliminate system timing issues lock detect core power supply: 1.8v i/o power supply: cml and lvpecl at 1.8v, lvds and cmos at 1.8v or 3.3v, phase detector at 3.3v power consumption: 450 mw typical @ 1.8v standard cmos fabrication process 11 x 11 mm, 127-pin bga pacakge compliant with industry standards such as optical internetworking forum (oif), telcordia, itu-t, and ieee 802.3ae standards. reduces design cycle and time to market. high level of integration allows for higher port density solutions. uses the most effective silicon economy of scale for cmos- based devices. low power consumption eliminates the need for external cooling sources. features summary of benefits oc-192/stm-64/10ge transmission equipment sonet/sdh optical modules add/drop multiplexers digital cross-connects atm switch backbones sonet test equipment terabit routers applications bcm8125 orx orx orx orx BCM8124 bcm8125 BCM8124 network interface processor network interface processor
overview ? phone: 949-450-8700 fax: 949-450-8710 e-mail: info@broadcom.com web: www.broadcom.com broadcom corporation 16215 alton parkway, p.o. box 57013 irvine, california 92619-7013 ? 2004 by broadcom corporation. all rights reserved. 8124-pb02-r 04/30/04 broadcom ? , the pulse logo, and connecting everything ? are trademarks of broadcom corporation and/ or its subsidiaries in the united states and certain other countries. all other trademarks mentioned are the property of their respective owners. the BCM8124 is a fully integrated msa-compatible quad-rate sonet/ sdh/10ge/fec transmitter operating at 9.953, 10.3125, 10.664, and 10.709 gbps with serializer and clock multiplication unit (cmu). the low-jitter lvds interface and onboard low-jitter pll exceed optical internetworking forum (oif), ieee 802.3ae, telcordia, ansi, and itu-t jitter standards. the BCM8124 reference clock input frequency is user-selectable to the line rate divided by either 16 or 64. the BCM8124 provides skew control between the lvds transmit parallel input clock and data to accommodate difficult timing variances. a 10-word fifo decouples the parallel input timing domain from the serial output timing domain. an internal phase detector and charge pump can be used to implement a cleanup phase-locked loop (pll) for line/loop timing applications. the BCM8124 can be powered with a single 1.8v supply or dual 1.8/ 3.3v supplies without any special power supply sequencing requirements. boosted input voltage range is available at the lvds inputs to interface with devices operating non-standard common-mode output voltages ranging from 0.85 to 2.2v. the data bit order and/or polarity can be reversed to facilitate ease in printed circuit board (pcb) layouts. the BCM8124 comes in a 11 x 11 mm, 127-pin bga package. fifo control skew control write pointer read pointer 16 x 10 fifo 16:1 mux output retime input register divide-by-16 divide-by-4 multi-rate cmu charge pump phase detector txreset por rb_lvds txpiclksel txpskewsel0/1 txpiclkp txpiclkn polsel txdin0p txdin0n txdin15p txdin15n lsbsel ifsel vcp/n txratesel0 txratesel1 txrefclkp txrefclkn pdclnpll sysclkp sysclkn txrefsel vcpclnpll lvds parallel inputs lvpecl reference clock input txfifoerr tsdp rb_tx tsdn txpclkp txpclkn txlockerr txmclkp txmclkn cml serial output lvds reference clock outputs
|
